This document is a formal response to the request received from UNDERWATER and it covers provision of Diving Equipment, always subject to availability, for surface supplied diving projects, including mix-gas diving.
All EQUIPMENT is IMCA Compliant. Assembled in accordance with Design Documents D023 &D340 and maintained according to IMCA D018 for the Initial and Periodic Examina-tion, testing and Certification of Diving Plant and Equipment.
Our surface supplied diving systems are composed by two containers including diving control, DDC and ancillary equipment (compressors, air storage, hot water machine…).
Diving System 1 can only be used only with two containers. Systems 2 & 3 can be used as DDC/Dive control only (stand alone containers). That means that we can provide 3 full systems or 1 full systems and 2 independent DDC and/or 2 independent dive controls.
DIVING SYSTEM 1 – Composed by two containers: HCSU100001 & HCSU100005.
DIVING SYSTEM 2 – Composed by two stand alone containers: HCSU100017 (dive
control) & DDDU 344511 (DDC).
DIVING SYSTEM 3 - Composed by two stand alone containers: HCSU 100121 (dive
control) & HCSU 100102 (DDC).
Each system is completed by a workshop/storage container.
Normally a full system is composed by three containers.
Data sheet of each system could be found, on following pages.
We have 5 launch and recovery systems (LARS), three single units and two double units.
With double units, footprint is optimized reducing space need on deck.
HYDRA LR 50 A2 (3 units)
The LR 50 A2 is a 2-diver launch and recovery A frame. The A frame winch and hydraulic package includes a 1-ton divers winch with 80m of wire rope, and a 0,65-ton (1,3-ton double-reeved) guide wire winch with 160m of wire rope. Two independent hydraulic power packs are mounted under the winch skid and provide main and standby power requirements for the system.
Its footprint allows it to be shipped in a standard container.
HYDRA LR 50 A2T (1 unit)
The LR 50 A2T is a 2-diver launch and recovery A frame and a 3-diver standby recovery A frame all in one. The working divers are transported up and down in the inner basket with the 3-diver standby basket remaining in its standby mode. When needed, the standby basket is automatically configured for deployment (simply drop the floor and deploy). The winch and hydraulic package includes a 1,3-ton working divers winch with 80m of wire rope, a 1,95-ton standby divers winch with 80m of wire rope and a 1,3-ton (2,6-ton double-reeved) guide wire winch with 160m of wire rope. Three independent hydraulic power packs are mounted under the winch skid and provide main and standby power requirements for the system.
Its footprint allows it to be shipped in a standard container.
SMP Twin Basket Diver LARS
The Twin Basket Lars is a 2-diver launch and recovery A frame and a 3-diver standby recovery A frame in two different baskets. The working divers are transported up and down in one of the baskets with the 3-diver standby basket remaining in its standby mode. When needed, the standby basket can be deployed independently.
Left blank SCUBA REPLACEMENT BOATS (3 + 1 units)
We have two types of Scuba Replacement Boats (SRB).
Type 1 (3 units) is a 8,5 mts. High Speed Off-Shore Diving Workboat created for high performance in all conditions. The SRB 8.5 is delivered standard with reinforced high-density polyethylene (HDPE) hull structure.
The open style work deck and the powerful substructure provide a versatile heavy duty accessory platform.
Type 2 (1 unit) is a 7,5 mts Rigid Inflatable Boat adapted to fit diving needs and under Spanish flag.
A portable surface supplied system, commonly referred to as SCUBA replacement equipment, can, in certain circumstances, be used in place of a complete surface supply diving systems. Such systems have the advantage of being readily portable, thus offering greater flexibility during the diving operation, but are limited in the supply of breathing air available and in most cases are used for inspection work only but can be used for any type of underwater job up to -15 mts.
NDT Equipment
Cathodic Potential
Thickness Gauge
Magnetic Particles Inspection
TOOLS
We have a wide range of tools and equipment in order to be able to perform almost any type of underwater job required. Any other equipment not listed available on request.
Hot Cutting/Welding
UW water cutting/welding system
Tightening
Hydraulic Torque Wrench PLARAD + sockets
Impact Wrench Stanley IW12 + sockets
Impact Wrench Stanley IW16 + sockets
Hyraulic Bolt Tensioning Hydratight System (full)
Hydraulic flange puller
Hydraulic flange spreader
Other hydraulic tools
Nut splitter systems (HTNS-6/7/12/13/16/17)
NDT Equipment
Wire cutter
Cathodic Potential
Hydraulic Grinder
Thickness Gauge
Break hammer
Magnetic Particles Inspection
Cleaning Equipment
Water jetting system
Sandblaster
Barnacle Busters
Metal Detectors
DiverMag1
Pulse-8X
Spool Design
Metrology jig set
Dredging Equipment
Air Lift (no datasheet)
Hot Water Machine
Lifting Equipment
Air Lifting Bags (open and closed)
Crane Scale
Trifords & Chain Pullers
Calibration Equipment
Air purity test kits
Gauges calibration equipment
HASKEL hoses pressure test equipment (no datasheet)
